1
Hi, Guest!

Voltage&Frequency Protection / SynchronismCheck Relay(FANOX)

Update Terakhir
:
02 / 07 / 2018
Min. Pembelian
:
1 Unit
Perusahaan ini telah berdiri sejak tahun 2010 dan telah ikut berkiprah dalam kancah kelistrikan di Indonesia.kami menyediakan barang dan jasa, sebagai sebuah perusahaan yang bergerak di bidang supplier dan contractor electrical kami selalu mengutamakan kepuasan costumer jangan ragu untu menghubungi kami, kami akan bantu anda dalam menemukan alat-alat electric yang anda butuhkan. adapun produk yang kami stock sbb: 1. RELAY.. SEPAM 1000+ ( MG) , SPAJ, SPAS, SPAM, SPAU, RTXP18 ( ABB) LFAA101, MICOM 122, 124, 921, MBCH, MCGG, MLLG, MVAX, MVTR, MVAA, KCGG ( AREVA / ALSTHOM) 2. POWER SUPPLAY DAN RELAY IDEC 3. TRANSFORMER DAN KUBIKAL 20KV-70KV 4. JOINTING DAN TERMINATING ( RAYCHEM, 3M, CELLPAC) 5. KABEL ( SUPRIME, TRANGKA, KABEL METAL, KABELINDO) 6. MCB, MCCB, ACB, GCB, ( MG, ABB, GE, AEG, 7. CT DAN VT 20KV - 150KV.( SADTEM, TRAFINDO, MG) 8. PEKARJAAN PEMASANGN INSTALASI GEDUNG DAN PABRIK, ..

Detail Voltage&Frequency Protection / SynchronismCheck Relay(FANOX)

For HV, MV and LV Distribution Systems and for Decoupling, Load shedding and Loss of main (Islading) Protection.

Main characteristics:

  • Protection functions: 27(2), 27V1, 59(2), 59V2, 59N(2),  ΔV/ΔT, 74TCS, BF, 52, 79, 81U/O(4), 81R(2), 86, 78, 25.
  • Auxiliary power supply (24-110 Vdc / 48-230 Vac).
  • 5 attempts of reclosing with 79 protection function (Recloser).
  • Synchronism check: Voltage differences, frequency slip, angle differences, DLDB, DLLB, LLDB. (Function 25).
  • Direct signalling/control of function 52 (Circuit Breaker) and function 79 (Recloser).
  • Metalic box with high electromagnetic compatibility level (EMC) and wide range of operating temperatura.
  • 5 oscillographic records, 20 fault reports and non volatile RAM memory: stores 200 events without power supply thanks to its internal RTC (Real Time Clock).

Hi-tech design that offers the greatest security and protection for Transformers or Electrical machines.

Loss of Mains (Islanding) detection

Loss of Mains (Islanding) occurs when part of the public utility network loses connection with the rest of the systems. If this situation is not detected, then the generator could remain connected, causing a safety hazard within network.

Automatic reconnection of the generator to the network may occur causing damage to the generator and the network.

SIL V protection relay detects this situation thanks to its voltage and frecuency functions focused on the Rate of change of frequency (ROCOF) method.

Tampilkan Lebih Banyak
aneka daya indonesia
aneka daya indonesia

ANEKA DAYA INDONESIA

Anggota PREMIUM 1 Tahun
Jalan Matematika IV No 43 Kel Jatikramat Kec Jatiasih, Bekasi
Indonesia 17421
Bekasi
31 / 10 / 2019
Hubungi Kami

Detail Voltage&Frequency Protection / SynchronismCheck Relay(FANOX)

For HV, MV and LV Distribution Systems and for Decoupling, Load shedding and Loss of main (Islading) Protection.

Main characteristics:

  • Protection functions: 27(2), 27V1, 59(2), 59V2, 59N(2),  ΔV/ΔT, 74TCS, BF, 52, 79, 81U/O(4), 81R(2), 86, 78, 25.
  • Auxiliary power supply (24-110 Vdc / 48-230 Vac).
  • 5 attempts of reclosing with 79 protection function (Recloser).
  • Synchronism check: Voltage differences, frequency slip, angle differences, DLDB, DLLB, LLDB. (Function 25).
  • Direct signalling/control of function 52 (Circuit Breaker) and function 79 (Recloser).
  • Metalic box with high electromagnetic compatibility level (EMC) and wide range of operating temperatura.
  • 5 oscillographic records, 20 fault reports and non volatile RAM memory: stores 200 events without power supply thanks to its internal RTC (Real Time Clock).

Hi-tech design that offers the greatest security and protection for Transformers or Electrical machines.

Loss of Mains (Islanding) detection

Loss of Mains (Islanding) occurs when part of the public utility network loses connection with the rest of the systems. If this situation is not detected, then the generator could remain connected, causing a safety hazard within network.

Automatic reconnection of the generator to the network may occur causing damage to the generator and the network.

SIL V protection relay detects this situation thanks to its voltage and frecuency functions focused on the Rate of change of frequency (ROCOF) method.

Tampilkan Lebih Banyak
Kontak Kami  
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus someone@example.com !